|
Southern Model Supplies |
---|
Product Code: PL29
Barcode: 5050881081600
PL-29 Resistors. Pack of 10 1/4 watt 1000ohm.
Product Code: PL38B
Barcode: 5050881082003
16/0.2mm 3 amp. Length 7m (approx 23ft)
Product Code: PL38G
Barcode: 5050881082034
16/0.2mm 3 amp. Length 7m (approx 23ft)
Product Code: PL38R
Barcode: 5050881082027
16/0.2mm 3 amp. Length 7m (approx 23ft)
Product Code: PL38Y
Barcode: 5050881082010
16/0.2mm 3 amp. Length 7m (approx 23ft)
Product Code: PL38BK
Barcode: 5050881082041
16/0.2mm 3 amp. Length 7m (approx 23ft)
Product Code: PL13
Barcode: 5050881080306
Simple inexpensive switch easily fitted underneath the Turnout Motor (PL-10) to provide electrical switching for frog polarity signals etc. Suitable only for OO/HO and larger scales. Rated 1.5 amps.
Product Code: PL12X
Barcode: 5050881080207
"Adaptor base kit (no spring) x2 Any or Multiple Scales"
Product Code: PLS140
Barcode: 5050881082850
SmartSwitch 1m Extension Cable
Product Code: PL35
Barcode: 5050881081952
The Peco PL-35 Capacitor Discharge Unit is for use with a solenoid type motors PL10/PL11 etc. Connect to the 16v ac supply on your transformer. Part of the Peco Lectrics Control System
Product Code: PL21
Barcode: 5050881081303
PL-21 Four Pole Double Throw Toggle Switch (for use with SL-E383F)
Product Code: PL64
Barcode: 5050881082300
"Oil-like ""Powerlube"" for pickup problems lubricating motors/bearings"
Product Code: PL24
Barcode: 5050881081334
Allows switches to be ganged together and operated simultaneously.
Product Code: PL70
Barcode: 5050881082409
Suitable for OO/HO N and many narrow gauge locos. Length: 254 mm (10in).
Product Code: PL33
Barcode: 5050881081938
PL-33 Microswitch enclosed type (for use with SL-E895/6)Rated at 16 volts with 2 amp (continuous) or 2.5 amps (momentary). One per pack
Product Code: PL19
Barcode: 5050881081204
"PL-19 Microswitch Housing (for SL-E790BH) Plugs directly into the Gauge O Double Slip microswitch not included (PL-33)."
Product Code: PL32
Barcode: 5050881081921
Rated at 16 volts with 2 amp (continuous) or 2.5 amps (momentary). Two per pack.
Product Code: PL12
Barcode: 5050881080207
"The PL-12 Adaptor Base should be used in association with most non-PECO turnouts where the over-centre spring feature is not available. It can be affixed above or below the baseboard and give the modeller the ability to ""lock"" the point blade in either"
Product Code: PL10E
Barcode: 5050881080023
Simple inexpensive switch easily fitted underneath the Turnout Motor (PL-10) to provide electrical switching for frog polarity signals etc. Suitable only for OO/HO and larger scales. Rated 1.5 amps.
Product Code: PL28
Barcode: 5050881081563
Makes a neat job of mounting your lever switches into a mimic diagram or home made panel.
Product Code: PL8
Barcode: 5050881079980
"Developed as a mount for the LGB motor so that it can be fitted to Peco turnouts. Full instructions included."
Product Code: PL9
Barcode: 5050881079997
"Base unit for use with the motor with the extended pin ref. PL-10E. Full instructions and screws included."
Product Code: PL26B
Barcode: 5050881081518
Passing Contact Switch - Black Lever